Print Page - Tatula SV knob bearings

Title: Tatula SV knob bearings
Post by: fritz1 on March 14, 2018, 07:22:40 AM

Hi guys,

i wanted to install two second knob bearings on my tatula sv, there seems to be no changeable bushing though. Is it missing or is it pressed in tightly?

THX

ps: this is a serious question, thx in advance!

Title: Re: Tatula SV knob bearings
Post by: fritz1 on March 15, 2018, 12:32:21 PM

come on guys, nobody?

Title: Re: Tatula SV knob bearings
Post by: handi2 on March 15, 2018, 02:31:47 PM

If there are bushings in the knob you have to push them out with something, measure them, then get the bearings. If you replace the bottom bushing with a bearing it will rust quickly. The one closest to the handle blade.

Title: Re: Tatula SV knob bearings
Post by: fritz1 on March 15, 2018, 04:31:09 PM

Thank u very much, ill keep an eye on that.

ps: the bushing is pressed in tightly, fixed it! THX

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: fritz1 on March 14, 2018, 07:22:40 AM