i have eleven of the old 24-57 torpedo handles for the 6/0 senators that are left. these were probably purchased 5 years ago and are brand new, never mounted on a reel. they currently retail for $35. i am selling them for $27 each. figure $3 for shipping. when they're gone, they're gone. since i carry my own line of 6/0 handle arms, i will likely never order these again. want to bring an old penn 114h back to stock condition? here is the handle!
(http://alantani.com/gallery/11/1_20_01_15_7_43_15_11719767.jpeg)
here is brand new 24-114 stock penn handle. it has the later style 4/0 senator grip and a single hole, $17 plus $3 shipping.
(http://alantani.com/gallery/11/1_20_01_15_7_56_17_11721910.jpeg)
there are sixteen of the old 24-349h penn senator power handles left, brand new, never mounted. like the 6/0 power handles, these were purchased 5 years ago and forgotten. they currently retail for $22. i am selling them for $20 each. figure $3 for shipping. these are GREAT handle grips to install on your penn 320/321/330 gti's and gt2's.
(http://alantani.com/gallery/11/1_20_01_15_8_09_18_11722910.jpeg)
SOLD - here are six of the old 24p-40 handle grips from the old penn 40 gls. not even sure why i have these. the grip is the same as the 24-349h but the arm is anodized aluminum and the position of the single hole is placed midway between the two holes of the 4/0 senator power handle. if i was going to pick a distance for a single hole handle arm, this is the distance i would pick. they are brand new, never mounted, i am selling them for $17 each with $3 for shipping. restoring an old graphite lever drag? here is your handle.
(http://alantani.com/gallery/11/1_20_01_15_8_36_41_11723135.jpeg)
not sure what to do with these. this is the old 24-349 single position 4/0 senator arm with a tiny jigmaster grip. i guess the arm is worth something. i can't think of a single reel that i would put this arm on, except perhaps the old penn 970 or 980. again, it's a jigmaster grip on a single position 4/0 senator arm, $5 each plus $3 shipping.
(http://alantani.com/gallery/11/1_20_01_15_11_41_11_117242038.jpeg)
these are interesting. six of them are marked 24-40 and one is marked 24-330. they are the same handle, a painted aluminum arm with a small international-style grip. the ends of the grip are capped with silver/plain anodized aluminum, not the international gold. there is a single 4/0 senator hole and a pretty good length between the grip and drive shaft. the handles are new, never mounted on a reel, but the plastic grips show some scratches from being bagged together rather than individually. they are bagged individually now, $20 each, plus $3 shipping.
(http://alantani.com/gallery/11/1_20_01_15_11_53_38_117252242.jpeg)
these very short squidder handles are the newer #24-155. they retail for $21 but will sell here for $12, plus $3 shipping. the hole size will fit a jigmaster or squidder gear sleeve and are brand new, never mounted on a reel.
(http://alantani.com/gallery/11/1_21_01_15_9_53_56_117281405.jpeg)
these are the 24-555 from the old penn graphite star drag reels. they retail for $16, i'm selling them for $10 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_6_56_12_11765685.jpeg)
SOLD - here is a 24-310 handle. it's the same as the grip used on the penn 220. it fits a jigmaster gear sleeve and is actually a nice looking handle grip, $10 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_7_08_25_117662256.jpeg)
SOLD!this one is nice! there is no number stamped on it but it is a short throw handle with a 4/0 senator grip and a jigmaster hole, $15 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_7_08_27_117671330.jpeg)
jackpot! there are 12 of the old gold 24-965's that are brand new. these were discontinued quite a while back. there is also one of the newer 24b-965 grips. chances are you have a penn international 955 or 965 with a corroded handle. the twelve gold anodized handle arms are $20 each, the chrome handle arm is $15, and shipping is $3.
(http://alantani.com/gallery/11/1_21_01_15_12_21_31_11726606.jpeg)
ok, that's it for new penn handle arms. send me an email or a pm if you want to order anything. thanks! alan
Alan,
Will these handles fit Jigmasters? "there are sixteen of the old 24-349h penn senator power handles left, brand new, never mounted. like the 6/0 power handles, these were purchased 5 years ago and forgotten. they currently retail for $22. i am selling them for $17 each. figure $3 for shipping. these are GREAT handle grips to install on your penn 320/321/330 gti's and gt2's."
Thanks
Mike
Alan is this one still available - here is a 24-310 handle. it's the same as the grip used on the penn 220. it fits a jigmaster gear sleeve and is actually a nice looking handle grip, $10 plus shipping. - if so I will take it.
I would also be interested in this one if available: "this one is nice! there is no number stamped on it but it is a short throw handle with a 4/0 senator grip and a jigmaster hole, $15 plus shipping."
Mike
PM'd sent
Victor
Alan, I can use some of the 24-349H handles...should be two holes and a slightly larger t-bar than a stock 113..
Looks like you have them for sale at $17 each...I can use a half dozen
Thanks!
pm sent, thanks!
Alan,
I can use some of the 24-349H handles...should be two holes and a slightly larger t-bar than a stock 113..
Looks like you have them for sale at $17 each...I can use four of these.
Also if you still have this one;"there is no number stamped on it but it is a short throw handle with a 4/0 senator grip and a jigmaster hole, $15 plus shipping." I will take it also. (It's near the end, before the gold handles)
Thanks
Mike
I can use two (2) of the #24-349h handles for my 330s if you have any left.
Thanks
mr. tani do you have aney of the 24 349 left
Alan: Do you have any of the 349h handles left and a 57 ? I could use 5 or so of the 349.
Quote from: Hardy Boy on April 07, 2017, 04:49:53 PM
Alan: Do you have any of the 349h handles left and a 57 ? I could use 5 or so of the 349.
got lots of everything. send a pm with your address and the number of each that you want and i'll send them out. thanks! alan
Hi Alan, I'm looking for a Penn 24-555 handle to complete the refurb of my sons reel, will you post to New Zealand?
Hi Alan,
Do you have any more 24-555 handles? If not, can you recommend something that will work on a 545GS?
Thanks,
Jim
sorry, all gone..... :-\
Hi Bud. Just confirming, nomore 24-555 Handle? Thanks Alan.
yup, all gone.... :-\