Text only | Text with Images

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => D.A.M. Quick => Topic started by: festus on October 31, 2017, 03:21:42 PM

Title: DAM Quick 220 N - - Question about a washer
Post by: festus on October 31, 2017, 03:21:42 PM
All my DAM Quick reels have two of these washers except for my 220N. One is between the drive gear and the slide, the other between the slide and c-clip. Every schematic I've seen show only one washer between the slide and c-clip.

My question is can any harm come from using the reel without the washer between the slide and drive gear?
Title: Re: DAM Quick 220 N - - Question about a washer
Post by: foakes on October 31, 2017, 05:18:25 PM
It will work just fine either way, Festus -- provided it is lubed with grease for proper function -- not too much, not to little..

Best,

Fred
Text only | Text with Images