Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: theswimmer on October 30, 2014, 05:46:48 PM

Title: Black Side 6/0 Senator
Post by: theswimmer on October 30, 2014, 05:46:48 PM
Does anyone know which # Carbontex drag washers I need for this reel?
And a source as Dawn says she doesn't have anything that will fit......
Title: Re: Black Side 6/0 Senator
Post by: fIsHsTiiCkS on October 30, 2014, 05:49:39 PM
Im not sure of the measurements but Mystic Reel Parts carries the HT-100 Carbon fiber drags for the 6/0

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Title: Re: Black Side 6/0 Senator
Post by: theswimmer on October 30, 2014, 06:09:32 PM
Thanks , I saw that but I really like the carbontex.

I hope someone knows because I am about 60 miles away from the reel at present.
Title: Re: Black Side 6/0 Senator
Post by: Bryan Young on October 30, 2014, 08:58:04 PM
I have the number at home.  It's not as thick as the HT-100s though so you may need to add an additional metal washer or two.
Title: Re: Black Side 6/0 Senator
Post by: alantani on October 31, 2014, 01:16:42 AM
with the black 6/0 penn senator 114, you can fit five of the #6-114 carbon fiber ht-100 drag washer inside the main gear and one underneath.  this combination will deliver all the drag pressure you need.  no need for anything else.
Title: Re: Black Side 6/0 Senator
Post by: Shark Hunter on October 31, 2014, 02:43:19 AM
My thinking Exactly!
https://www.mysticparts.com/PennParts/Parts/6-114SP.aspx (https://www.mysticparts.com/PennParts/Parts/6-114SP.aspx)


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Title: Re: Black Side 6/0 Senator
Post by: Bryan Young on October 31, 2014, 03:11:30 AM
Oh I don't have a number.  My bag says 114 0.76 mm thick.   Sorry.
Title: Re: Black Side 6/0 Senator
Post by: theswimmer on October 31, 2014, 02:29:29 PM
Thanks for the help guys.
Got an order coming from Scotts.
Title: Re: Black Side 6/0 Senator
Post by: theswimmer on October 31, 2014, 02:45:43 PM
Quote from: alantani on October 31, 2014, 01:16:42 AM
with the black 6/0 penn senator 114, you can fit five of the #6-114 carbon fiber ht-100 drag washer inside the main gear and one underneath.  this combination will deliver all the drag pressure you need.  no need for anything else.

Good Morning Alan,
This is what I have coming from Scotts.
6-114SP Kit, Drag Washer Kit HT-100® with Metals (10 pcs) (114)

4-114 Washer, Hard Fiber Spacer Washer (Under Main Gear) (114)
Correct yes?

By the way, I polished the wrench 8)
Thanks again......

JT
Title: Re: Black Side 6/0 Senator
Post by: alantani on October 31, 2014, 10:27:37 PM
actually, no.  i put a regular carbon fiber washer under the main gear, a #6-114.  i have one in the mail box being sent to you.  it will go out with tomorrow's mail.
Title: Re: Black Side 6/0 Senator
Post by: theswimmer on November 02, 2014, 04:45:53 PM
Quote from: alantani on October 31, 2014, 10:27:37 PM
actually, no.  i put a regular carbon fiber washer under the main gear, a #6-114.  i have one in the mail box being sent to you.  it will go out with tomorrow's mail.
Thanks again Alan.
I hope you put a note with what I owe you in the envelope ;D
Miss Mari and I are off to go skiing for a couple of hours.......
Best,
JT
Title: Re: Black Side 6/0 Senator
Post by: alantani on November 04, 2014, 12:07:51 AM
no charge.  buy me a beer someday!
Title: Re: Black Side 6/0 Senator
Post by: theswimmer on November 04, 2014, 03:54:18 AM
Adult beverage of your choice it is.
I do think you  have some sort of Wierd Fresno connection going on.
It takes me 4 days min to get mail from the Bay and I had the washer at about 10 am on my desk? WTH?
Thanks again.
Best,
JT
Title: Re: Black Side 6/0 Senator
Post by: Shark Hunter on November 04, 2014, 04:41:28 AM
Alan Don't Play. ;)
I live 3500 miles away and I usually have my parts in two days. ;D