How do you reverse the handle on a Microlite? Thanks, Joe.
Just unscrew the crank axle by rotating the handle backwards -- pop off the cover cap on the opposite side -- swap -- screw the crank axle onto the other side -- replace the cover cap on the opposite side -- done.
Best, Fred
I thought that was how it was done but I couldn't get it budge! ;D Guess I need to soak in more in PB Blaster. Thanks again Fred.
Joe --
If you keep spraying that poor little reel with PB Blaster -- it may disintegrate before the sun comes up tomorrow!
😄😄😄
Hold the rotor -- then reverse the crank with some force -- it will come loose.
Best, Fred
;D I got it Fred ... didn't have to spray it too much more.