I have a S338-3.6 and a 440-3.6 that I'd like to change over to 5-1. Are these parts available?
Thanks, Bill
originals? no. only aftermarket. but stock 4:1 penn jigmaster gears should work.
Who are the aftermarket sources? I'm not finding them online
Gear sets pop up on ebay from time to time, other than that it's hard to find them. Be easier to sell those and buy a few reels
https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom
Bill,
If you're willing to part with one of those 3.6:1 gear sets; shoot me a PM and let me know what you'd want for one.
-Mike
I looked on eBay briefly but only saw some main gears. Will the Jigmaster gear set fit both the 338 & 440?
Quote from: Bill_N on May 18, 2021, 12:22:54 PM
I looked on eBay briefly but only saw some pinion gears. Will the Jigmaster gear set fit both the 338 & 440?
If I can get the 5-1 gears I think I'll hold onto the 3.6-1 gears for spares.
Quote from: Bill_N on May 18, 2021, 12:22:54 PM
I looked on eBay briefly but only saw some pinion gears. Will the Jigmaster gear set fit both the 338 & 440?
Only the 4:1 gear set will fit. The pinion gear of the 5:1 gear set has a smaller collar than Newell's gear set.
All I see on eBay for both reels are main gears, no pinions. Seems weird to me.
I could use a few pinions, i have a few orphan main gears. Never seem to see them on ebay
Quote from: alantani on May 17, 2021, 11:32:39 PM
https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom
I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.
I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom
This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom
Quote from: Black Pearl on May 18, 2021, 11:35:52 PM
Quote from: alantani on May 17, 2021, 11:32:39 PM
https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom
I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.
I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom
This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom
Alan,
If you made the collar on your 5:1 pinion the same inside diameter as your 4:1 pinion gear, then yes, it'll fit. If not, it will not fit because the 5:1 pinion has a smaller inside diameter collar.
Can you verify the fit as Bryan is saying above?
Quote from: Black Pearl on May 18, 2021, 11:35:52 PM
Quote from: alantani on May 17, 2021, 11:32:39 PM
https://www.prochallenger.com/product/112h-or-jigmaster-500-501-standard-gear-set-kit/63?cs=true&cst=custom
I thought that Jigmaster 505/506 gear set might fit Newell. I could be wrong.
I made this set by copying Newell gear set https://www.prochallenger.com/product/jigmaster-505-506-stainless-steel-gear-set/71?cs=true&cst=custom
This one is the 3.6:1 https://www.prochallenger.com/product/3-6-1-newell-200-300-and-400-series-stainless-steel-gear-set/32?cs=true&cst=custom