Quote from: Crab Pot on May 17, 2024, 11:50:43 PMQuote from: pjstevko on May 17, 2024, 09:57:00 PMIf you can find a through wired sinker you won't need the safety leash to the treble hook.
I'd hate to lose the fish of a lifetime by trusting the factory wire.
Be it a assist hook or treble, it's cheap insurance to leash it.
In my opinion.
Top assist hooks obviously work too!
Thanks for posting the pic Lee,
Steve
Quote from: jurelometer on May 17, 2024, 11:13:47 PMCutting board material is either low to medium density polyethylene or polypropylene. Both are rather soft and squishy, and are actually a bit difficult to work with to make small dimensionally accurate parts, as the material will flex and melt easily from friction during machining.
If you wanted to DIY, Delrin (or any acetal) would be a better choice. It has very good mechanical properties and is easy to machine properly. It is widely avalable.
A 3D printing trick that is not used enough is to 3D print fixtures for holding/indexing stock to make more accurate parts out of other materials.
I suspect that getting the part from Fred is the more economical and ultimately satisfactory approach, but if you want to try making your own part, I understand. I am the same way.
-J
Quote from: pjstevko on May 17, 2024, 11:23:06 PMQuote from: Keta on May 17, 2024, 10:08:55 PMOr just go with one or two assist hooks on top.
Thats the rigging most Captains I've fished with prefer.
They don't like trebles swinging around if the fish is hooked by the assist hooks.
Quote from: pjstevko on May 17, 2024, 09:57:54 PMQuote from: Bill B on May 17, 2024, 05:17:18 PMI'm getting excited. It's going to be a busy month. The wife has a fundraising benefit for Teen Challenge. Then we celebrate her birthday and our 30th wedding anniversary. I still need to make space in the freezer, just in case 😉. I still need to pick up 1 rod.
Bill
Bill what rod? And what reel is going on it?
Quote from: MarkT on May 17, 2024, 10:49:11 PMQuote from: Steve V. on May 17, 2024, 08:50:05 PMI know I'm late to the party but I have 58. Probably about 75 reels to go with them. I'm a novice collector. I do have 2 20" drill presses though. I had 4 but gave 2 to my son. Good old American iron. He got a Rockwell and a Delta (plus a bench top Delta) and I kept a Delta and a Powermatic (plus a bench top Delta). Yes, I used to collect (hoard) machinery and tools.Rockwell, Delta, Powermatic... sounds like table saws!
Steve
Quote from: pjstevko on May 17, 2024, 09:57:00 PMIf you can find a through wired sinker you won't need the safety leash to the treble hook.
Page created in 0.018 seconds with 9 queries.