Text only | Text with Images

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => D.A.M. Quick => Topic started by: jgp12000 on July 07, 2021, 11:18:27 AM

Title: 220 Slide Washers
Post by: jgp12000 on July 07, 2021, 11:18:27 AM
I was tearing down a 220 I got on Ebay, and it had a washer on each side of the slide (100-433)? The schematic I have shows only one washer (100-098) then the safety clip (100-078) What is correct, seems like it would be better to have one on each side of the slide?
Title: Re: 220 Slide Washers
Post by: Wompus Cat on July 07, 2021, 01:02:32 PM
I have some the same way . Never gave it a second thought .
The Great Dam Kahuna will know  ;D
Title: Re: 220 Slide Washers
Post by: jgp12000 on July 07, 2021, 01:45:30 PM
Fer sure,I don't like to bother him unless necessary and this way we will all learn....
Title: Re: 220 Slide Washers
Post by: foakes on July 07, 2021, 02:37:47 PM
220 uses (1) washer between the oscillation slide and the main gear — 330 uses (2) — one on each side of the slider.

It can be varied — providing there are no catching or friction issues (sometimes, if changed from the schematic, there will be some slight extra friction).

Best, Fred
Text only | Text with Images