I got 3 oz on ebay $12.00 1.5 Microns and been mixing a small amount with any marine grease and been using only on the brass or stainless pinion and main gears, I feel it makes the gears smoother and lasts longer on the gears. FYI
I have some of that and mix it with 321.............................Joe
Penn's original lub for there spinning reels, Spinfisher Lube, contained Moly. Remember the blu and white metal tubes? Brake caliber lube also has Moly.
Quote from: Reel 224 on August 13, 2018, 10:00:35 PM
I have some of that and mix it with 321.............................Joe
you use it on Bearings ????
should last a long time in a bearing ???
Yes I do, but the first time I tried 321 and Molly I used it on a circulating fan I use during the winter months to circulate heat from my fire place. I would have to unfreeze the fan every season with 3 and 1 oil. So i tried 321 with molly and it's going on 5 years that I didn't have to lube it.
Joe
Volkswagen transmission type1 that's tired ?
1/4 tube of Moly ,
That trans is still going strong 14 years later.......,