Print Page - Penn 4/0 & Electramate help

Title: Penn 4/0 & Electramate help
Post by: BryanC on December 17, 2015, 04:14:40 PM

I picked up an Electramate 440XP on craigslist yesterday. When I got home I noticed that the drive socket (not sure if this is the correct term) does not appear like it will mate up to the 4/0 gear sleeve. It is a round opening and has a slot at the bottom. The slot is not wide enough for the end of the gear sleeve though. Is there a piece missing? Something that goes between the drive socket on the Electramate and the gear sleeve on the reel? I have not been able to locate a schematic or parts list for the Electramate online.

Thanks in advance!

Title: Re: Penn 4/0 & Electramate help
Post by: handi2 on December 17, 2015, 04:43:21 PM

Yes there is another piece that screw onto the gear sleeve to accept the electric drive. It is SS.

Title: Re: Penn 4/0 & Electramate help
Post by: BryanC on December 17, 2015, 04:46:26 PM

Thanks. I figured it must be something like that. I will call Electramate and order that part.

Title: Re: Penn 4/0 & Electramate help
Post by: shadfun on January 10, 2018, 03:58:54 AM

My is missing that parts to,any one know where to get this parts Thanks

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: BryanC on December 17, 2015, 04:14:40 PM