Aloha! Just born to this site and appreciate all the positive knowledge that is being shared on this site. I'm currently working on a Newell 646 and have a problem that I discovered while taking it apart. On the reel base just above the reel foot is cracked or separating from the foot, I think it started from the reel seat digging in to the base of the reel when tightened. Can anyone share with me on how to go about fixing this problem? maybe adhesive's? Mahalo!
Aloha & e komo mai.
Can you post some pics of the reel seat.
Bryan
this one may be tough. most epoxies will not hold. can you also give us the width of the reel seat? oh, and welcome!
Trying to send a picture but can't figure it out. Need your help! What do I need to do? The width i 3 3/8.
Welcome! Aloha!
Aloha, read the post on how to send a picture, but still dumb founded. Got myself a mac apple and still a newbie with that too.
Welcome!
Sounds like a 4/0 or 6/0 Penn reel seat by the measurements. I have nothing close to that.
Mike
aloha hurley and mahalo for joining us
Aloha. E komo mai.
I'm in Papaikou.
Welcome from the Sacramento Delta....
Thank you for all the aloha. I know i'm going to be learning a lot from all the knowledge and experience that you all provide. Thanks again for all the love and aloha!
welcome to Mr. Tani's neighborhood...
howzit. can run da clamp but gotta get extended bolts or try find one new base. I believe the 550 is the same base. I don't think penn has a part that will work. If you not in one rush, i can sell you one 550 base i think from an S series. I get the bars too. Shoot me a pm. Shoots
b
Hi.
Welcome...I have the bars and seat from a G454. You're welcome to them if they will fit.
Bob