can anyone help with this one. i've never had one of these apart before. i'm wondering if the ring just screws on.....
Quote
Dear Alan,
I have an issue and need your help for assembly Ryoga sideplate.
I was maintainance last night and suddenly pop out.
Can you advise me how to place it back since I tried but failed.
(http://alantani.com/gallery/16/1_14_02_17_1_20_05_167211129.jpeg)
Looks like you stumped the Peanut Gallery boss :o.....Bill
i think it was screwed. the guy figured it out, but hasn't told me how yet. :-\
Quote
Hi Alan,
Those are 2 pcs parts like shown in the picture, wright!
1st the magnetic parts; 2nd the chasing edge
There is a wire lock around the edge of magnetic parts.
Inside the chasing was a track like form (3 track)
This wire have to place under track no.2, and turn to push until all fit.
Best Regards,
It is the same as the luna 300 in design. They use a wire that is fed through a slot in the cover when the two pieces are togeather it keeps them from coming apart. Then the assembly just screws on.
Mike