Print Page - What am I missing? Mitchell 330

Title: What am I missing? Mitchell 330
Post by: Smols on December 29, 2017, 03:58:41 PM

What part am I missing on this Mitchell 330 spinner? The axle does not move back and forth when cranking. It looks like there should be some sort of pin that marries the axle and the oscillation slide, but I don't see anything like that on the schematic.

Thanks!

Smols

Title: Re: What am I missing? Mitchell 330
Post by: foakes on December 29, 2017, 04:18:01 PM

Hi Paul --

Looks like the pin is busted off that attaches to the oscillation slider.

If you need one -- just PM me, and I will drop one off at the Post Office this afternoon -- N/C.

Best,

Fred

Title: Re: What am I missing? Mitchell 330
Post by: festus on December 29, 2017, 04:24:39 PM

Yep.

Title: Re: What am I missing? Mitchell 330
Post by: Smols on December 29, 2017, 04:47:21 PM

Thanks Fred and Festus, that is exactly what I am missing. Fred, thank you for your genorisity, I will send you a pm.

Smols

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Abu Garcia/Garcia/Mitchell => Topic started by: Smols on December 29, 2017, 03:58:41 PM