Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: publius on April 02, 2020, 02:54:09 AM

Title: Needle bearing on handle shaft calcutta 200
Post by: publius on April 02, 2020, 02:54:09 AM
My needle bearing sleeve (cluster) that presses in the right sideplate that the gearshaft passes through and the handle slides on is shot. Any ideas on where I can get a replacement. Thank you. Pics attached.
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: Keta on April 02, 2020, 03:12:56 AM
Smooth Drag had them.  They are called anti reverse bearings or clutch bearings.
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: publius on April 02, 2020, 03:20:44 AM
I talked to Dawn and she doesn't have them.
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: alantani on April 02, 2020, 03:21:03 AM
it's a 10mm inside diameter and a 12mm height, or a "1012." EWC is stainless steel  the one you have is not, which is likely why it rusted.  google "ewc 1012" and you should see some options.  
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: publius on April 02, 2020, 03:23:39 AM
Thank you, Alan. I'll try that.
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: publius on April 02, 2020, 03:32:40 AM
Does this look like the one, Alan? https://www.bocabearings.com/products/s-ewc1012-23505
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: alantani on April 02, 2020, 03:40:16 AM
crud, lemme figure something else out.  you will have a pm in a minute.
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: alantani on April 02, 2020, 03:45:33 AM
https://www.abec357.com/EWC1012-10x16-17x12-MM-ABEC357-p/ewc1012.htm
Title: Re: Needle bearing on handle shaft calcutta 200
Post by: publius on April 02, 2020, 04:38:54 AM
Thank you very much, Alan.  Yes, that is a MUCH better price than Boca.
Text only | Text with Images