Print Page - Penn Torque Gear

Title: Penn Torque Gear
Post by: 190Montauk on August 03, 2018, 06:27:53 PM

I purchased 8 of these for my Torque start drag reels. 6 have a recessed ring and 2 don't. The 2 that don't have 4.8 etched on them. Any idea why the 6 have a recessed ring?
Thanks.

Title: Re: Penn Torque Gear
Post by: mizmo67 on August 03, 2018, 06:35:56 PM

Hi,

Going to pull your orders and check stock..possible inventory got mixed.

Title: Re: Penn Torque Gear
Post by: 190Montauk on August 03, 2018, 06:59:47 PM

Thanks. I talked to Scott yesterday and was going to email him the photos.

Title: Re: Penn Torque Gear
Post by: mizmo67 on August 03, 2018, 07:04:15 PM

Quote from: 190Montauk on August 03, 2018, 06:59:47 PM
Thanks. I talked to Scott yesterday and was going to email him the photos.

Ah good. I thought you just came here to post first instead of letting us know so that we could check the stock for you!

I sent you a reply via the support ticket that I started.

Short answer is possibly a change of machining to be able to tell the three gears apart at a glance, since they look the same except for the number of teeth, but we have not confirmed this at this time.

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: 190Montauk on August 03, 2018, 06:27:53 PM