Print Page - Shimano TLD Star 20/40

Title: Shimano TLD Star 20/40
Post by: Mangi on July 14, 2011, 10:21:19 AM

Hiya Guys,

I picked up a TLD Star 20/40 for a steel and need to replace the bearings. (Reel bought with no bearings inside) I'd like to fix it up as a reel to use off the reefs.

Does anyone know the exact dimensions of the bearings for a 20/40? Plus, what size is the drive shaft bushing, because I would like to replace that with a bearing too.

Thanks in advance!

Title: Re: Shimano TLD Star 20/40
Post by: george.s on July 14, 2011, 11:07:25 AM

here you go. http://alantani.com/index.php?topic=17.0

Title: Re: Shimano TLD Star 20/40
Post by: Mangi on July 14, 2011, 11:23:04 AM

Thanks George,

So it is safe to say the 15/30 and 20/40 use the same size bearing:

Spool Shaft Bearing: 4 x 11 x 4mm
Right Spool Bearing: 6 x 12 x 4mm
Drive Shaft Bearing: 8 x 16 x 5mm

Not what is size of the bushing where the drive shaft fits into the right hand side plate?

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: Mangi on July 14, 2011, 10:21:19 AM