I have a few titanium drag stars available. All are 2.5" diameter, 1/8" thick Sal's Stars, and can be had to fit fine thread Jigmasters, Newell 200-600's, and the 113H. I have a total of 7 available, pricing as follows:
Fine thread Jigmaster - $23
Newell - $24
113H - $24
These were from a special run, and are not something I plan on keeping in stock. So act fast if you want one.
Reply here to reserve yours, and I will PM you with payment info.
I'll grab 1 fine thread Jigmaster for me thanks Adam.
I'll take one of the jigmaster fine thread as well thanks Adam.
Mike
I'll take a 113H.
Thanks for the heads up!
Mike
Better put me down for a fine thread jigmaster too
Thanks
PM's sent.
Btw, these titanium stars weigh just 15 grams, while the stainless ones are 24 grams in this size.
I will take a jiggly star also
113H would be great if available... Thx.
Only two left now.
Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve
Quote from: vilters on August 16, 2017, 06:04:10 PM
Adam, let me know if a jigmaster or newell titanium star is available please. thanks, Steve
Both, or either. I don't cut the threads until after I receive an order.
Btw, the Newell and fine thread jigmaster stars are interchangeable. The only difference is that I supply the Newell ones with a small spacer to keep the star from bottoming out on the side plate. That spacer is also available separately.
I'll take two for a 113H, Sal. Just emailed you this morning. Thanks!
One left!
I'll take it for a 113H and a titanium counter balance handle blank for a 113H Thanks mitch27 PS(6mm hole)
Thanks for making these, PayPal Info sent. mitch27
On the outside chance there are any Sal's stars left, I'll
take a jiggy and 113h please.
Thanks
-gary
Are you making any more drag stars for the 113H? In the thin style?
I am up for a couple.
PM me your email addresses as I think I have a few of Sal stars and a couple others in SS.
Dom
Hi Adam,
Are you still making off-set handle blanks for Penn reels in s. steel and if so, do you produce one which would fit a Torque TRQ30LD2 lever drag reel? If you require the sleeve square hole size dimensions I can send them to you.
Derek.
I'd like to get a titanium drag star and an offset handle (3/16 hole) for a newell 300 series . If any are available. Thanks,Kyle
Quote from: trickbag on November 19, 2019, 08:12:48 PM
I'd like to get a titanium drag star and an offset handle (3/16 hole) for a newell 300 series . If any are available. Thanks,Kyle
There will be a lead time on any titanium parts as Ill have to order material. Ill send you a PM when its ready to ship.
I could use a few Newell stars too when the time comes. Thanks
Ill get some material on order.
Count me in for a Newell star or 3, in 200, 300, and 500 sizes please.
i also would like a couple newell stars when available. thanks
I would like 1-2 jigmaster stars if there are any available
Quote from: Chank on July 06, 2020, 12:59:29 AM
I would like 1-2 jigmaster stars if there are any available
Hehe,,,,that didn't take long,,,,, ;) you're in the right place now,,, :D but there's this thing you should know about it's called the "rabbit hole" your go down that right now and there's no coming back,,,,, :o but that's ok,,,,it's fun,,,,,,,,, ;D
How long is the normal wait time for these awesome looking stars?
Quote from: Chank on July 07, 2020, 06:08:36 PM
How long is the normal wait time for these awesome looking stars?
They come out here and there,,,,,,, ;) before he cuts them you can put your order in,,,,,,,,, ;D
I'll take a 113H.
I ordered some 113h stars about a month ago. He said he is out of them and has to get some material to make them. Also the company that does his water jetting that the machine is down for repair. He is hard to get a hold of so who knows what else is going on. Rudy