Print Page - Newell 300 series handles

Title: Newell 300 series handles
Post by: monkutare on September 20, 2018, 05:27:59 PM

Any new suggestions for replacement handles for the Newell 300 series? I do like the aluminum armed OEM handles but they are hard to find.

Title: Re: Newell 300 series handles
Post by: Swami805 on September 20, 2018, 11:03:57 PM

Adan at Motive fabrication on here makes some nice ones in titanium,I believe Mr Tani has something as well. You can use the handle off a gold shimano trinidad if you want offset but you'll need to file the hole a little.
There's a bunch of knock off newell blades on the big auction site that don't cost too much also.

Title: Re: Newell 300 series handles
Post by: Swami805 on September 20, 2018, 11:09:30 PM

Here's a couple motive fab's and a Trinidad

Title: Re: Newell 300 series handles
Post by: bluefish69 on September 21, 2018, 12:32:44 AM

I put the middle handle arm [Titanium]on a R 533 with SS Star. The owner said that it looked & worked great.

Mike

Title: Re: Newell 300 series handles
Post by: alantani on September 23, 2018, 04:55:54 PM

http://alantani.com/index.php?topic=252.0

(http://alantani.com/gallery/14/1_17_05_16_4_50_03_14308174.jpeg)

Title: Re: Newell 300 series handles
Post by: monkutare on October 01, 2018, 06:30:05 PM

Quote from: Swami805 on September 20, 2018, 11:09:30 PM
Here's a couple motive fab's and a Trinidad

Which Shimano handle is that?

Title: Re: Newell 300 series handles
Post by: Caranx on October 02, 2018, 09:39:36 AM

You might want to inquire with Randy "vintage offshore tackle" with the 300's

Title: Re: Newell 300 series handles
Post by: Swami805 on October 02, 2018, 11:31:00 PM

It's from a gold Trinidad. Takes a little careful filing to fit the gear sleve

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Newell Tutorials and Questions => Topic started by: monkutare on September 20, 2018, 05:27:59 PM