we've been ignoring accurate for a long time. they are still excellent reels and deserve a second look. i have some old accurate handles, some grips and arms, and even some new items. figure $3 for shipping unless stated otherwise. here goes!
#1 - ATD handle arms - if you have an older ADT 6, 12 or 30, then you got a very short handle arm. there are a dozen handle arms for the ATD 50 that fit perfectly on the smaller ATD's. some are new, some are lightly used, all look fine and are $15 plus shipping.
#2 -
SOLD - single speed boss handle arm, used grip, new arm, will fit on a jigmaster sized gear sleeve. $20 plus shipping.
#3 -
SOLD - single speed boss handle arm, used grip, used arm, will fit on a jigmaster sized gear sleeve. $20 plus shipping.
#4 -
SOLD - single speed boss handle arm, unusual gold grip, used arm, will fit on a jigmaster sized gear sleeve. $20 plus shipping.
#5 -
SOLD ATD 6/12/30 arm, will fit on a 4/0 senator, used maybe once, few scratches, looks new, $30 plus shipping.
#6 -
SOLD - accurate ball grip, used, $10 plus shipping.
#7 -
SOLD - accurate ball grip, used, $10 plus shipping.
#8 -
SOLD - accurate T-grip, used, $12 plus shipping.
#9 -
SOLD - accurate T-grip, used, $12 plus shipping.
#10 -
SOLD - accurate counterweight, $3 plus shipping.
#11 - second generation boss two speed handle arm, new, $10 plus shipping.
#12 -
SOLD - first generation boss two speed handle arm, new, $10 plus shipping.
#13 - custom first generation boss two speed handles, precision cast from surgical stainless steel, $15 plus shipping. Caution!!!! the arm is designed to fit a drive shaft with a post that is 0.205" x 0.205". midway through production of the old boss two speed reels, the post of the drive shaft was changed to 0.220" x 0.220. these handle arms will not fit the later models of boss 197's, 270's, 870's and 665's. not unless you spend an hour filing away at the hole.
any questions, let me know!
I'll take both accurate ball grip and both handle grips.
I knew I should have snagged those ball grips when I saw them ...
Yeah, someone knew what kind of deal he was getting, they probably went within minutes.
I don't believe it was fair for us in the east side, I was in bed when you listed those :-\.
Alan, you find anymore , me and Bryan are interested in them. ;D
If no one is interested in the #10 counter weight, I'll take it. If you have more, just put them in the bag.
Thanks!
Sal
Alan, do you think the opening for the gear shaft on those off-set handle arms could be modified to fit say the penn 113H/114H or any of the penn's for that matter. How about the TLD-25. I really like the offset arms and wouldbe willing to file/dremmell out the opening to fit these.
Quote from: garking84 on January 23, 2015, 11:17:18 AM
I'll take both accurate ball grip and both handle grips.
sold. send me a pm with your shipping info and i will mail the grips out. shipping will be combined. thanks! alan
Quote from: Bryan Young on January 23, 2015, 11:21:54 AM
I knew I should have snagged those ball grips when I saw them ...
you could have just had them. you know i hate ball grips!!!! ;D
Quote from: Alto Mare on January 23, 2015, 11:46:34 AM
Yeah, someone knew what kind of deal he was getting, they probably went within minutes.
I don't believe it was fair for us in the east side, I was in bed when you listed those :-\.
Alan, you find anymore , me and Bryan are interested in them. ;D
If no one is interested in the #10 counter weight, I'll take it. If you have more, just put them in the bag.
Thanks!
Sal
the counterweight is coming out, no charge. now, normally you east coast guys have an advantage because you're up before us. daron ping me about something and i told him to go back to bed. he pinged back saying he was actually getting up to go to work!!!!!
I saw this at 3:21 am, and I was too late... hahaha.
Thanks Alan.
Quote from: BMITCH on January 23, 2015, 12:06:48 PM
Alan, do you think the opening for the gear shaft on those off-set handle arms could be modified to fit say the penn 113H/114H or any of the penn's for that matter. How about the TLD-25. I really like the offset arms and wouldbe willing to file/dremmell out the opening to fit these.
i have three of the original accurate offset arms, similar to handle #12, but there is damage to the drive shaft hole. if you want to drill/dremel out the hole, i will mail them out. they would be a buck each plus $3 shipping. send me a pm with your shipping info and i will mail them out.
Thanks Alan. PM sent.
Alan, the counterweight arrived, thank you so much, I appreciate this.
Sal
sal, anytime!!!!!
Quote from: alantani on January 23, 2015, 06:47:45 PM
Quote from: BMITCH on January 23, 2015, 12:06:48 PM
Alan, do you think the opening for the gear shaft on those off-set handle arms could be modified to fit say the penn 113H/114H or any of the penn's for that matter. How about the TLD-25. I really like the offset arms and wouldbe willing to file/dremmell out the opening to fit these.
i have three of the original accurate offset arms, similar to handle #12, but there is damage to the drive shaft hole. if you want to drill/dremel out the hole, i will mail them out. they would be a buck each plus $3 shipping. send me a pm with your shipping info and i will mail them out.
Alan, if bmitch didn't grab em all I'll take one too. I'll add an extra buck to cover such a low PayPal transaction and if it works out you can just throw it in my gear sleeve package to save on shipping.
Shiftee, Alan sent them to me but they won't work for what I had in mind. Your more than welcome to them just PM me your address.
Bob
Bob, if these are the ones you got, they work on my Jigmasters
(http://s766.photobucket.com/user/pescatore3/media/011_zpseb97d33b.jpg.html)
Yes Sal, those are the ones. I'm just not to sold on the material. Besides all my reels now got those nice Keta Kranks on them. If they were outta more robust material I would use them.
Got it Bob, I thought yours wouldn't fit.
bob, thanks a million!!!!!!
Alan, the ones you sent me I knew they were used. The square openings where the gear sleeve comes through were peened over I'm guessing to get a snug fit on the sleeve. I was gonna hack at them to make them fit the penn sleeve. Well, as it now stands...I have about 7 of your SS arms (old style) and a bunch that Lee had made for the smaller penn's. So if anyone wants these three they are welcome to them. Just remember they are used.
to bad #5 wont fit a jigmaster. I think that handle would look great on my Accurate conversion I'm building
Hey Sal, can you tell me what handle that is on your first post and is it a direct fit for the jigmaster. Also is the knob Okuma? and could you tell me where you purchased them and approximate cost.
Thanks so much, .. Lou
Lou, it's an Accurate handle for Boss reels and Penn applications.
I got it here about 3 years ago, I purchased a couple
http://reelygone.com/bboatdhawifi.html
Some were worried about not having enough threads on the handle screw from the handle being a little thicker, I personally never had a problem.
Sal
Quote from: Big Tim on February 11, 2015, 03:45:33 AM
to bad #5 wont fit a jigmaster. I think that handle would look great on my Accurate conversion I'm building
I have a new Accurate handle with grip that will fit a Jigmaster. Let me know if you're interested.
I'll take #5.
I'm guessing it should fit a 330 gti correct?
Any of those #1 - ATD handle arms still available? I'd take a few for some old ATD 30s.
has anyone fitted one of alans handles and bar to a 624 captain mitchell reel if so which type and how did it improve the working of the reel
how big is the reel, or can we get a photo?
624 is about 112 size (old bearing 3/0). cant remember what sleeve looks like.
so either handle grip would be fine!
Quote from: alantani on January 23, 2015, 06:47:45 PMi have three of the original accurate offset arms, similar to handle #12, but there is damage to the drive shaft hole. if you want to drill/dremel out the hole, i will mail them out. they would be a buck each plus $3 shipping. send me a pm with your shipping info and i will mail them out.
Alan, do you still have any of these damaged ones at this price? I need to file the hole to 7.5mm X 7.5mm to fit my Torque 100 (if you think that would be safe to do). I'm assuming they are aluminum?
yeah, sorry, all gone...... :-\
fyi, the stainless copies pictured after the aluminum ones you asked about have worked well for me after I enlarged the hole. I was able to drill and tap the hole for the lock screw on a penn reel.
Quote from: vilters on July 05, 2018, 07:19:16 PMfyi, the stainless copies pictured after the aluminum ones you asked about have worked well for me after I enlarged the hole. I was able to drill and tap the hole for the lock screw on a penn reel.
Thanks, but I'm trying to lighten things up on this reel. It's original steel handle is way too big and heavy for such a small reel so looking to go w/ aluminum.