Could someone help me understand how to repair the drag clicker pin and spring on the drag star for a curado 100d or chronarch 50mg. The pin has come out and I am not sure how to replace and keep it in place.
Saw your other post and responded...
This one explains the problem better......
http://alantani.com/index.php?topic=3435.0
what you have to do is put the star drag on tight, all the way down on the NUT (ready for handle assembly), then insert the spring, then Bullet clicker ~ & place the Plastic washer on top to hold it all in place (make sure serrated side is on clicker) ~ While you install the handle assembly & hold it all down at the same time.
Need 3 or 4 hands & a foot, but youll get it with a few attempts/tries...
Many times the spring is short enough that just setting the Plastic washer on it will keep it all together while you put the handle on...
When your done & can do it easily.. Brain Surgery will be an easy task... ;D
.
Thank you, I'll give it a try.
Make sure you still have he clicker mechanism, you can loose that part easily.