Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Accurate Tutorials and Questions => Topic started by: gstours on April 05, 2022, 07:57:17 PM

Title: Hex driver bit size question.
Post by: gstours on April 05, 2022, 07:57:17 PM
In an effort to remove the sideplate and crank arm it came as a surprise that I did not have the correct driver size for an accurate boss 870 reel. :al
  Can someone help me with the size of the sideplate driver screws (Allen head) sae?
Or possibly metric Allen size? 
  Thanks for your reply.   I'd like to find a screwdriver type for the Allen instead of the ell shape larger common type.    :fish Gst.
Title: Re: Hex driver bit size question.
Post by: handi2 on April 05, 2022, 08:52:12 PM
I don't remember the size but they are definitely American hex.

Keith
Title: Re: Hex driver bit size question.
Post by: gstours on April 06, 2022, 02:16:49 AM
Thanks Keith,  as I'll have to order online, just wanted to not waste time nor money.
   Sae seems to make sense,  if that makes sense? :cf
Title: Re: Hex driver bit size question.
Post by: Robert Janssen on April 06, 2022, 06:59:30 AM
Torx T7 on mine
Title: Re: Hex driver bit size question.
Post by: handi2 on April 06, 2022, 02:04:29 PM
T7 may fit but they are American Hex for a proper fit.

Keith
Title: Re: Hex driver bit size question.
Post by: Robert Janssen on April 06, 2022, 04:20:03 PM
Maybe the specs changed at some time. Maybe they were hex once upon a time. Now they are Torx.
Do not mix & match hex with Torx.
Title: Re: Hex driver bit size question.
Post by: day0ne on April 06, 2022, 07:38:17 PM
I've even had some Torx 6  on some reels
Title: Re: Hex driver bit size question.
Post by: Hardy Boy on April 06, 2022, 08:50:26 PM
T6 on the Acc Boss's that I work on.

Cheers:

Todd
Title: Re: Hex driver bit size question.
Post by: gstours on April 07, 2022, 04:29:26 AM
Thanks for your response,s fella's.   I did order a hex head mini screwdriver set from a reputable vendor to get going on a project reel.   
  After looking further in the deep sideplate screw holes I'm thinking I might agree with the idea of the torx head screw.   I've added some pictures with my handy phone 📱.   The last pik is the shift screw and it appears to be different in size and type of head.   And it also seems that the torx bits are more common in my searches.
  Thanks again for sharing your knowledge here.   Cheers to another project! :d
Title: Re: Hex driver bit size question.
Post by: Gfish on April 07, 2022, 03:34:54 PM
Yeah, T-7 on my 2012 DP Boss Extreme, but side-plate screws only.
Title: Re: Hex driver bit size question.
Post by: gstours on April 10, 2022, 03:12:32 PM
Thanks again for your information on the screws.  Its possable thru the different generations some things changed,  like the screws. :cf
  I will say now that the hex driver set arrived and the shift housing screws were hex as shown in my pik, and the 5/64'' seemed to fit good.
  And the sideplate screws seemed to be torks and the 1/16 hex fit them just fine.   Maybe others can benefit from this?  Just saying. ;)
 One last inquiry is the size/pitch of the two shift housing screws as i,d like to tap a new handle blank and make another offset crank arm for the twindrag 870.    Thanks for any reply.    Peace.
Text only | Text with Images