So I need some help. I have a pinion gear shaft for a Zebco Cardinal. Problem is I don't know 16774648365932264096512547857876.jpg if it fits a size 3 or size 6. They have different part numbers and look alike. Is there a way to tell? Length or something. Thanks for your help.
Thanks everyone for the help. It's the shaft for the worm gear. That's what the schematics for the Cardinal 6-7 says. Sorry I haven't figured out how to add pictures yet.
i've never worked on these. anyone else?
I work on a lot of these, they are excellent reels.
Was waiting for Tommy to respond —- since he is our resident expert on these.
Are you referring to the worm pinion gear —- or the spool shaft?
Glad to measure a couple up for you after a pic or two —- and your clarification.
Easy to do —- just need to know which part.
Best Always, Fred
What Fred said, I'm confused, too. A photo would sure help, maybe with some diameter & length dimensions.
I'm guessing you're meaning pinion gear since it's near impossible to confuse the main shafts. The 6 & 7 shafts are steel and the 3 & 4 shafts are brass.
With regards to the pinion gears the 6 & 7s are the same and interchangeable and much larger in length and diameter than the 3s or the 4s.
Once we figure out what part you're referring to giving you a measurement is simple, Fred or I, either one, can post it for you.
Quote from: Midway Tommy on February 24, 2023, 06:34:56 PMWhat Fred said, I'm confused, too. A photo would sure help, maybe with some diameter & length dimensions.
I'm guessing you're meaning pinion gear since it's near impossible to confuse the main shafts. The 6 & 7 shafts are steel and the 3 & 4 shafts are brass.
With regards to the pinion gears the 6 & 7s are the same and interchangeable and much larger in length and diameter than the 3s or the 4s.
Once we figure out what part you're referring to giving you a measurement is simple, Fred or I, either one, can post it for you.
it's the shaft for the worm gear. That's what the schematics for the Zebco Cardinal 6-7 says. Sorry I haven't figured out how to add pictures yet. Rookies right. Lol. Thank you!
Cardinal "4" shaft is 4 1/4", brass and thick.
Cardinal "3" shaft is 3 1/2", brass and much thinner.
Let us know if this helps.
Best, Fred
Quote from: buckfever on February 24, 2023, 03:36:27 AMSo I need some help. I have a pinion gear shaft for a Zebco Cardinal. Problem is I don't know 16774648365932264096512547857876.jpg if it fits a size 3 or size 6. They have different part numbers and look alike. Is there a way to tell? Length or something. Thanks for your help.
Thanks everyone for the help. It's the shaft for the worm gear. That's what the schematics for the Cardinal 6-7 says. Sorry I haven't figured out how to add pictures yet.
Thanks for your patience. So I figured out how to insert a picture. Twice. Here's the part I'm referring to.
That opens a whole new window. What reel are you trying to install it into? The Card 3 is the smallest and the 6/7 is the largest. If it's for a 6/7 it won't fit into a Card 3 bearing or the oilite bushing at the rear, plus it would be way too long. What makes you think it might not be for a Card 4?
Quote from: Midway Tommy on February 27, 2023, 04:56:20 AMThat opens a whole new window. What reel are you trying to install it into? The Card 3 is the smallest and the 6/7 is the largest. If it's for a 6/7 it won't fit into a Card 3 bearing or the oilite bushing at the rear, plus it would be way too long. What makes you think it might not be for a Card 4?
I'm actually not trying to install it. I am going to sell them but I want to make sure I list it correctly. I'm pretty sure it's for the 6-7.