Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: Capt. Bob Pastor on March 10, 2015, 11:29:38 AM

Title: 113h drag washer kit
Post by: Capt. Bob Pastor on March 10, 2015, 11:29:38 AM
Greetings,

I received a kit from Scott's and it has 5 CF washers, 4 round washers, and 2 eared washers. When I took the reel apart there were only 3 round washers. Where does the extra one go?
Title: Re: 113h drag washer kit
Post by: fIsHsTiiCkS on March 10, 2015, 11:35:29 AM
Quote from: Capt. Bob Pastor on March 10, 2015, 11:29:38 AM
Greetings,

I received a kit from Scott's and it has 5 CF washers, 4 round washers, and 2 eared washers. When I took the reel apart there were only 3 round washers. Where does the extra one go?

You will only need 3 keyed (round washers) and 2 eared. Should go from bottom to top: CF washer, keyed, CF, eared, CF, Keyed, CF, eared, CF, keyed and you will be good to go.

I have gotten kits from them before and only received five metal washers. One thing to note is that if the above 5 stack configeration does not fill all the space, it most likely will, then the 4th keyed washer can be placed on the top to help with spacing.

Hope this helps.
Text only | Text with Images