bought a tranx 500hg used, everything works well except i've got crunchy handle bearings...looking to upgrade them but could not find what size they are. Any help would be appreciated.
I am not able to check if this is correct at the moment;
BNT4194 Ball Bearing Handle inner and drive shaft 5 X 9 X 3
They are easy enough to remove them and measure?
one is stuck and currently soaking in corrosion x
got em off...there are two and are different sizes
4x9x4 and 5x9x3
Quote from: thedonnguyen on September 16, 2018, 06:50:11 PM
got em off...there are two and are different sizes
4x9x4 and 5x9x3
Well at least the one was right, Ill note the other one for the future!
Good luck with the fixing.
Those bearings must be used across a bunch of reels. I put black Stella 14K handle knobs on both of my TranX 500 HG and just moved the bearings from the old to the new.