I lost the spool for my Sidestab 1000 today. I was able to retrieve the spool from the lake, but I lost the end button retainer, button and spring. Does anyone know where I can get these parts or a new spool? The parts lists shows part #7090 for the complete spool. Thank you.
Appreciate a photo -- then I can look to see if one might be in the bins.
Best,
Fred
sounds like you may need more parts... going by my older reels, it's:
button, cover, retainer spring, 2 washers
99% sure these would work:
http://www.ebay.com/itm/NEW-SHIMANO-SPINNING-REEL-PART-RD2909-Sidestab-1000R-Spool-Assembly-/291907472974?hash=item43f70a8e4e:g:QcUAAOSw8gVX~Tqa
http://www.ebay.com/itm/SHIMANO-AERO-1000-SPINNING-REEL-SPOOL-Rear-Drag-Mod-SR-SO-SC-SY-SI-NOS-/232190068528?hash=item360f9b4730:g:LkEAAOSwo4pYZXu2
Fred,
if you have the really old short Shimano 1000/2000 rear-drag spools, all the "innards" should be compatible, even though the spools are not & the cover looks different on top
Thank you for all your ideas and posts.
Here are some new completes that should work --
Best,
Fred
yup, those three black graphite spools (top photo front/ctr.) will do the trick & Fred is kinder/gentler than fleaBay... you can move the innards to your aluminum spool (note parts order -- it's not shown on schematic)
Fred,
is that bigger aluminum push-button to the left of them (bottom photo front/ctr.) 2000 or 2500?
2000, Roman --
If you need it -- let me know, it is new and complete.
Best,
Fred