Reel Repair by Alan Tani

Fishing => Fishing Line, Knots, Splices and Rigging => Topic started by: maxpowers on February 19, 2014, 02:58:36 AM

Title: Solid to Hollow Nail Knot / Nub tutorial
Post by: maxpowers on February 19, 2014, 02:58:36 AM
I am going to see if this will help some of the new people looking into working with braid.

first picture : braid cutter and nail knot tool
second picture:  some chopsticks for tightening braid
third picture: 30# test wire 6 feet folded in half
fourth pictures : white 80# seaguar theadhollow braid / orange 80 # sufix solid braid

Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: maxpowers on February 19, 2014, 03:06:09 AM
continued:

first picture : 2 ft 30 lbs tufline solid braid for making nail knots
second picture: inserting wire about 3 ft from tag end of hollow braid going toward the tag end
third picture:  exit hollow braid at tag end
fourth picture: inserting solid braid thru wire loop and pull thru the hollow
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: maxpowers on February 19, 2014, 03:09:48 AM
continued

first picture : nail knot tool to make nail nub on solid braid
second picture: nail knot prior to tightening
third picture: nail knot tightened to translucence
fourth picture: second nail knot butted against first knot

Nub is now done on the solid
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: maxpowers on February 19, 2014, 03:15:45 AM
continued:

first picture: hollow braid slid over solid braid and nub
second picture: nail knot tied on top of hollow and solid braid and butted against the inside nub to as stopper.  This is on the tag end of the hollow braid
third picture : finished nail knot stopper
fourth picture: nail knot on tag end of hollow braid to tidy up.  At this point you can put a bit of super glue here and on the nail knots and nubs if you like.  I used no glue.
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: maxpowers on February 19, 2014, 03:17:28 AM
continued:

The tag end of the solid braid can be trim and the hollow braid smooth over it and that completes the solid braid to hollow braid insertion.  You can do the some thing to make a wind-on leader with hollow braid and mono/fluoro.  Additional tool optional is a hollow needle or a set of hollow needles if you are making different pound test leaders.  Hope this helps.
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: LTM on February 19, 2014, 03:19:24 AM
Thanx max for posting this, eventually this will all sink into my brain and make sense.

Leo
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: Brendan on February 19, 2014, 03:45:13 AM
     After a quick look, very nice. I too will have to give it a few looks before I get it. I can appreciate it though. Thank you, Brendan.
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: Keta on February 19, 2014, 03:49:40 AM
It's really easy to do but hard to explain.
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: DaBigOno on March 02, 2014, 03:24:48 PM
Quote from: Keta on February 19, 2014, 03:49:40 AM

It's really easy to do but hard to explain.



YUP!       ;D
Title: Re: Solid to Hollow Nail Knot / Nub tutorial
Post by: BMITCH on March 02, 2014, 03:55:48 PM
Thanks Max, I'm putting this in my favorites so I can come back to it often. This looks good!