Hi every one, hope the new year has been good to you all so far, I smelt fuel in our boat yesterday, had reason to replace the cender in the fuel tank about 3 years ago, I was told to buy some special gasket compound for it , when I opened the tin container it came in it had set real hard, so I purchaced a hylomar aerograde gasket joining compound PL32, suposed to be resistant to fuels, have had it between the tank & gasket where the cender is, can someone tell me of the best compound & gasket paper to use, the sender came with a rubber type gasket that i thought was to flexible, but I did use it with the above compound, thanks in advance, have a good year. cheers don.
Check the Permatex website. I believe they have what your looking for. Agreed, smelling gas on the boat is not good.
All the best, .. Lou
Lou thank for your quick reply, cheers Don.
Agee with Lou. On our race boats we use permanent only
I like 3M 4200 and 5200.
Yes thanks men, I have sent a request to the peratex hot line, for them to recommend the correct compound, they will possibly get back to me AM Monday, tis 8:45 am in Western Australia- WA, now, thanks again cheers Don.
Hi every one, have received a reply from Peratex techical sercices, ITW, they recommend there designed to be fuel resistant compound 85420, I also spoke to a local ship wright, he has been using a loctite 3- for many years with know trouble, he was very helpful, cleaned up the old gasket goo, and the gasket, plus the cender with acetone, then buffed the cender plate for me, could not be more helpful, so hope this helps some of you in the future, and thanks for all your quick replies, cheers don.