Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: joel8080 on June 05, 2019, 02:38:16 PM

Title: Removing studs
Post by: joel8080 on June 05, 2019, 02:38:16 PM
I have a full accurate jigmaster and I want to put longer studs in the frame, I can not budge the studs it looks like they were put in with JB Weld, any Ideas on how to break them free without striping the threads or should I just move on to my next project?.

joel 8080
Title: Re: Removing studs
Post by: Keta on June 05, 2019, 03:04:41 PM
Carefully heat them up.
Title: Re: Removing studs
Post by: mikeysm on June 05, 2019, 03:15:30 PM
It should release around 350 degrees .

Mike
Title: Re: Removing studs
Post by: joel8080 on June 05, 2019, 04:01:55 PM
Thank You , I will try the heat..

joel 8080
Title: Re: Removing studs
Post by: thorhammer on June 05, 2019, 04:09:22 PM
Hey Joel, not sure how you are doing this but I've had some success with sauntering iron where I couldn't use torch.


Still waiting pics of your deckhand build! :)

John
Title: Re: Removing studs
Post by: joel8080 on June 05, 2019, 08:25:12 PM
Hi

I will get it out I just bought a new computer and trying to figure it out, so far I am not happy with windows 10.

joel 8080
Title: Re: Removing studs
Post by: Donnyboat on June 06, 2019, 03:54:07 AM
Hi Joe, windows 10 is a Payne in the back side, I still cant send pictures with mine, also if you need spelling correction, you have to right click on the word, cheers Don.
Text only | Text with Images