Hi
Thought I'd post this here also if it's okay, since I know a lot of you are anxiously awaiting them. Tyrnos Carbontex are finally in stock.
Tyrnos 8 & 10 $12.00 each
Tyrnos 12 & 16 $15.00 each
Dawn
that's great! i have reels waiting and need both. thanks! alan
They will be on the way Alan
Hi Dawn, are these the same thickness as the stock washers? Thnx!
The 8 and 10 are about .003 to .004 thicker than the stock. The 12 & 16 just a little more, approx .005-.006
Dawn
anything that will fit a 30 II ?
I am thinking about buying four of the them and I know they will need new drags (or at least I think they will)
Quote from: flvol77 on May 30, 2011, 03:38:01 AM
anything that will fit a 30 II ?
I am thinking about buying four of the them and I know they will need new drags (or at least I think they will)
I belive the TLD20s will fit in the Tyrnos 30II. You will need to do a little modifications though.
Dawn,
Do you still have these in stock for a Tyrnos 8II? I looked on your website and couldn't find a listing for them.
If so, whats the best way to place an order? Phone?
Thanks!
p.s. Alan, thanks for the great website...been lurking for a while and am finally getting into doing more vertical jigging here in FL with conventional gear so I figured I'd make it official and contribute what I could!
Welcome aboard, stradicfanatic.
BTW, Dawn may still be on holiday.
I think she is back in the 'Sweat Shop' as of Monday 5-14?????
Hope Im right I just sent in an Order!!!!!!!!!!!!!! :o
== = = = = = = = = =
Hi Guys and Gals
I will be heading out for a short cruise May 7 through 11. Let me know if you need anything before then, I will be closed that week.
Will they let me troll?
Dawn
= = = = = = = = = = = =
.
Hi
I am back, I was just swamped and playing catch up last week.
I do have the Tyrnos drags in stock.
Just give me a call if you like. 888-206-4656
Dawn
welcome back... :)
Yes, welcome back!!!!
AND, thanks for all you do..
(I Know I forget to say that often enough).
I got the Penn Parts and Cals, sooner then expected (as usual).
I knew you had to be swamped!!!
:-) ;D
Thanks Mel and Frank
She's BACK!! ;D and on top of it!! Dawn I got my order from Larry Mercer Last night!! Thanks again for all the help from both of us and getting it all into one shipping box!! Yes Guys Dawn TRIED to save us money!! Great job and service!! -Joe
dawn
do u have tyrnos 20,and30 in stock and price too in carbontec
Hi
No I don't make those, the carbon fiber they come with is supposed to be good.
Dawn
Hello Dawn,
Do you have carbontex washer for Tyrnos 30? I couldn't find that model on your website.
Thanks!
No sorry I do not.
Dawn
Great Dawn. Now I won't have to do this anymore..! I have removed the original drag material from the fiberglass backing. I use a heavy heat resistant 3m spray glue and applied the Carbontex material and used 4 clamps. After the adhesive is set the extra material is removed and the holes drilled thru ready to attach to the drag plate. This has worked for me on many reels but the first one was a Tyrnos 30 reel and it's still being used today.
hi dawn
do you have any thin ss washers for penn 113
keyed and eared/0.5?
thank you
Hi Wallace
No, not that thin, check with Bryan Young.