Print Page - HT 100 drags for a Dawai AD47LC?

Title: HT 100 drags for a Dawai AD47LC?
Post by: bob on January 13, 2010, 10:41:15 PM

any help on this Alan?

Title: Re: HT 100 drags for a Dawai AD47LC?
Post by: alantani on January 14, 2010, 06:07:21 PM

yeah, this one should be easy. i just worked on an older model 47 line counter. the drag set should be the same. i used three of the #56-4200 penn ht-100 drag washers inside the main gear. underneath the main gear i used a #6-965 that had been cut down from 24mm to 18mm. add the standard thick coat of cal's grease and it goes together quick and easy. you should be able to order them from your local shop, or send me a pm if you'd like a set. thanks! alan

Title: Re: HT 100 drags for a Dawai AD47LC?
Post by: bob on January 16, 2010, 01:53:42 AM

thanks got them ordered..

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: bob on January 13, 2010, 10:41:15 PM