Print Page - Abu UC5600C question

Title: Abu UC5600C question
Post by: ibfishin on August 29, 2009, 06:22:09 PM

What are the measurements of the bearing on the left side of the spool (under the plastic gear? The schematics only give part #'s not actual sizes.
Thanks,
Brian

Title: Re: Abu UC5600C question
Post by: alantani on August 29, 2009, 09:07:48 PM

i found the schematic. http://www.mikesreelrepair.com/schematics/albums/ambassadeur/Ambassadeur_UC_5600C_06_00.pdf it should be a standard 4x11x4mm. did you need one? you can get them at smoothdrag.com with drag washers and cal's grease. alan

Title: Re: Abu UC5600C question
Post by: ibfishin on September 12, 2009, 06:15:37 PM

Thanks for the info. I had looked on a schematic that gave the part number, but no size, and my micrometer is at my fathers house. I have a shopping list of things I need to get from Smooth drag.

Title: Re: Abu UC5600C question
Post by: alantani on September 13, 2009, 11:49:15 PM

tell dawn that i said "hi!"

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Ambassadeur Tutorials and Questions => Topic started by: ibfishin on August 29, 2009, 06:22:09 PM