Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Ambassadeur Tutorials and Questions => Topic started by: LLCC on June 13, 2016, 04:32:29 AM

Title: SERVICING — ABU Revo STX 8.0
Post by: LLCC on June 13, 2016, 04:32:29 AM
This is my first ABU Ambassadeur since 1980. I love Ambassadeurs - you buy one and it'll last you years and years and they work so well, you don't have to get another one unless you want to look fashionable. This time, I got me a Revo ver 3 STX 8.0. I was sold on its very light weight (even lighter than Daiwa's Alphas R-Edition); yet it has impressive drag numbers. The 8.0 ratio was something I thought was not viable as it would make the pinion too small, so I had to get one to find out if it is truly cutting edge technology or just a numerically impressive dud.

(https://lh3.googleusercontent.com/-QEryDx3oiVA/V14mJordUQI/AAAAAAAAHm4/bwX4d5vbZhwUMXgL7twlaxxbZ_nhwVK3wCCo/s640/15.jpg)

Here's a step by step greasing up that I did, prior to using the reel. By greasing a reel up before use, I get to protect the reel against friction wear and galvanic corrosion even before it has a chance to start.

Here's the link to the full step-by-step guide:
https://gaspinggurami.wordpress.com/2013/06/24/first-imprssion-abu-revo-ver3-stx-8-0/

HTH,

LL
Title: Re: SERVICING — ABU Revo STX 8.0
Post by: steelfish on July 04, 2020, 02:21:03 AM
old post bit really good and pretty detailed

thanks