Print Page - TLD 10 Handle upgrade size?

Title: TLD 10 Handle upgrade size?
Post by: deepblack on June 16, 2012, 02:11:57 AM

Hi All,
Before I go ahead and order Kolekar Handles from Alan I am after recommendations on the size for the reel. In other words in relation to the reel is the 4/0 too big? Or would the 2/0 be better?
Cheers,
John.

Title: Re: TLD 10 Handle upgrade size?
Post by: Bryan Young on June 16, 2012, 02:15:06 AM

If that's too big, I like the spinner handle. Same length, but smaller in diameter.

Title: Re: TLD 10 Handle upgrade size?
Post by: deepblack on June 16, 2012, 03:03:54 AM

Thanks Bryan, I didn't see them they look like a good option. Just placed an order now.

Title: Re: TLD 10 Handle upgrade size?
Post by: Bryan Young on June 16, 2012, 05:49:22 AM

Here's the pic of the 2/0, 4/0 and 6/0 handles.
(http://www.fullspeedfishing.com/gallery/data/500/medium/DSCN6158.JPG)

And here is a comparison between the 2/0 and spinner handle
(http://alantani.com/gallery/1/1_13_08_09_10_03_11_0.jpeg)

And the comparsion between a 4/0 and spinner handle
(http://alantani.com/gallery/1/1_13_08_09_10_03_19_1.jpeg)

Hope this helps.

Title: Re: TLD 10 Handle upgrade size?
Post by: deepblack on June 16, 2012, 06:03:55 AM

Yep,
I think the Spinner handles are the right option for them with the side by side comparison in keeping with the style of the reel.
Thanks Bryan,
John.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: deepblack on June 16, 2012, 02:11:57 AM