Hello, does anyone out there have an early Garcia Ambasadeur 5500C schematic? The earliest one I could find was the 79-08-04 unit listed on Mike's Reel Repair. Thanks in advance.
Hi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
If what Fred sent wasn't correct check out the 5000C schematics at https://www.reeldr.com/home/abu-garcia/.
Schematic 79-08-04 is the earliest they have for a 5500C on the ABU website.
Like many of us who have been in a different profession for a long time —- we do pick up a few tricks.
For me, being in the car business for over 50 years —-
I have kept my old Shop Manuals —- after threatening to toss them out a half dozen times because nearly everything is on the Internet.
But there is something to be said about an easily accessible flip/swivel shop manual organizer. Here is one I made many decades ago —- and still use occasionally.
I do have probably enough manuals to fill up about (3) of these.
Best, Fred
Smart Fred.
Not sure if it helps, but there are a couple of 5500s (75-11-00-brown & 78-11-01) earlier than 5500C 79-08-04 at this site: https://planetseafishing.com/reel-schematics/abu-models/abu-multiplier/abu-ambassadeur/abu-5000-series/.
The earliest 5500C they list is the 79-08-04.
Quote from: foakes on November 27, 2023, 09:41:43 PMHi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
Thank-you Fred but that's a 5000C...I'm looking for a 5500C. I also keep all my old car manuals PLUS I have all of myh dad's old manuals dating back to the 40's and 50's. : )
Quote from: jtwill98 on November 28, 2023, 02:10:43 AMNot sure if it helps, but there are a couple of 5500s (75-11-00-brown & 78-11-01) earlier than 5500C 79-08-04 at this site: https://planetseafishing.com/reel-schematics/abu-models/abu-multiplier/abu-ambassadeur/abu-5000-series/.
The earliest 5500C they list is the 79-08-04.
I don't think the 5500 schematic will help but I'll check them out. Thanks!
when did the first 5500c come out?
I got a 6500C in the mid '70s so I would guess around the same time.
Ok so the 5500C came out after the 5000C and also after the 5000(no C). So by my understanding it wouldn't predate the 5000C manual.
Is it specifically the first 5500C manual you're looking for?
I'm rebuilding a set of five for Christmas gifts for my father and brothers (and one for me). The earliest is 1973, two are 1976 and two are 1977. There are some differences in the handles and spool caps so I was trying to get accurate parts diagrams to include with the reels. There may be other differences too that I am not aware of yet.
Quote from: foakes on November 27, 2023, 09:41:43 PMHi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
Fred, judging by the binders in that picture you just might have one in the "old hard copy" format. I searched various websites and the earliest one I could find is 79-08-04. If I strike out here then my next step is to peruse Ebay for a 5500C instruction booklet that shipped with the reel because some of these included schematics.
Quote from: Walleye Guy on November 29, 2023, 12:28:32 PMQuote from: foakes on November 27, 2023, 09:41:43 PMHi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
Fred, judging by the binders in that picture you just might have one in the "old hard copy" format. I searched various websites and the earliest one I could find is 79-08-04. If I strike out here then my next step is to peruse Ebay for a 5500C instruction booklet that shipped with the reel because some of these included schematics.
Shipping reels today —- I will check in between packing boxes.
Best, Fred
Quote from: foakes on November 29, 2023, 04:49:09 PMQuote from: Walleye Guy on November 29, 2023, 12:28:32 PMQuote from: foakes on November 27, 2023, 09:41:43 PMHi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
Fred, judging by the binders in that picture you just might have one in the "old hard copy" format. I searched various websites and the earliest one I could find is 79-08-04. If I strike out here then my next step is to peruse Ebay for a 5500C instruction booklet that shipped with the reel because some of these included schematics.
Shipping reels today —- I will check in between packing boxes.
Best, Fred
Thank-you Fred, I really appreciate it.
We have a local parts house been here 50+ years all the guys been there 30+ years still use books, and my goto for hard to get parts.I only go to Advance Auto for no brainer parts.Some younger folks cant seem to think past what the PC tells them...I saw a dude on a FB Abu Group selling his Abu parts supply for $500,lots of baitcaster stuff.
https://www.facebook.com/groups/101531870466087/permalink/1355893661696562/?sale_post_id=1355893661696562&mibextid=Nif5oz
Quote from: Walleye Guy on November 29, 2023, 07:47:22 PMQuote from: foakes on November 29, 2023, 04:49:09 PMQuote from: Walleye Guy on November 29, 2023, 12:28:32 PMQuote from: foakes on November 27, 2023, 09:41:43 PMHi Matt —-
Not sure if this will help, or not.
I likely have some older ones in the old hard copy factory service manuals —- but here is one that appears to perhaps
3 years older.
Best, Fred
Fred, judging by the binders in that picture you just might have one in the "old hard copy" format. I searched various websites and the earliest one I could find is 79-08-04. If I strike out here then my next step is to peruse Ebay for a 5500C instruction booklet that shipped with the reel because some of these included schematics.
Shipping reels today —- I will check in between packing boxes.
Best, Fred
Thank-you Fred, I really appreciate it.
Fred, just checking in...did you ever get a chance to look?
You're putting a lot of effort into finding precisely accurate and appropriate schematics.
Are the people this gift is for the types who would ever look at and use those schematics, or are they likely just sending the reels back to you when they need service?
They would use them.
Here is a pic, from 1967 I believe.
Thanks Mark, but that's a 5000C...I'm looking for a 5500C.
If you will send me the foot and model numbers, I can check with a Facebook guy I correspond with.
PM me if you want.
-Steve
Here's a '76 schematic for that reel
Jon
Steve, thanks I really appreciate that. The lot numbers are 730301, 760603, 761003, 770803 and 771003.
Jon, thank-you for the 3/76 schematic!