I just recently disassembled a 12/0 for repair and forgot to secure the drag washers. They of course fell out and I have no idea what order to put them back in.
Help needed and appreciated.
Almost all the Penn drags are the same... Does this (https://www.mysticparts.com/Assets/images/pennparts/schematics/116l.pdf) help?
Sid
From the bottom up
carbon fiber, keyed metal washer, carbon fiber, eared metal washer, carbon fiber, keyed, carbon fiber, eared, carbon fiber, keyed, etc.
If they have the old asbestos drag discs and you plan of fishing this reel.
You are going to need the carbon fiber 7 stack upgrade.
The difference is night and day.
The old asbestos stack is in front. They are very thick compared to the HT-100 carbon fiber upgrade.
You will also need more metals as this upgrades it from a 5 stack to a 7 stack.
The whole kit is available from Mystic Reel Parts.
https://www.mysticparts.com/PennParts/Parts/6-116SP.aspx (https://www.mysticparts.com/PennParts/Parts/6-116SP.aspx)
"Edited as per Moderators to correct Scott's Bait & Tackles old online store over to their new store name Mystic Reel Parts / www.mysticparts.com"
Yep Shark Hunter I have the asbestos ones. I don't plan on fishing it so I will just keep it as is. If you could kindly tell me the order I would appreciate it. Thanks!
You only have two eared washers in that stack.
Start at the bottom of the gear with a asbestos washer, then a non eared metal. Then an asbestos washer and an eared metal, then asbestos, non eared metal, asbestos, eared metal, asbestos and a non eared metal. There is usually another non eared metal on top of that, but not always.
You are awesome! Thanks!
-Chris
Works perfectly now. Thanks Shark hunter!!
-Chris
Anytime Chris. ;)