A quick update.
I've got some of Aaron's pin pliers in stock. Red http://smoothdrag.com/Spool_Bearing_Pin_Removal_Pliers.html
Handles in gold http://smoothdrag.com/handles.html
Gear sets 113H & 114H http://smoothdrag.com/gear_sets.html
The Carbontex size list is updated. http://smoothdrag.com/Carbontex_washer_sizes_Retail3-2014.pdf
I've got 349H 5 drag stack KIT, Carbontex and Metal. Working on Daiwa 400H 5 drag stack, not sure how long on that. Working on Daiwa Tatula drags, about 3 weeks.
Great news Dawn.
Those spool pin pliers look really well made. Will be sure to buy a pair with my next order. Sure you must be getting busy with so many products 8)
Dawn very nice. I also like the new look of the site. Dominick
The kits you do save $$$ in postage costs and convenience all being all in one place.
very nice! i will figure out the gear sleeve availability for you.
Hello there ..r there carbontex washer available 4 the levelmatic series..i have doubles of 910,20,30,40,...did not want to use the old #140 I have hanging around..maybe I did not see on washer list price sheet..joe
The Penn 140 is close, but not quite for those reels. I believe this washers works: 20.65mm x 8.90
Dawn
Dawn....my fault,,,I have smoothie #140 grag kits...Not reel.....Is carbontex available 4 the levelmatic series...
Yes, I think this is for the levelmatic: 20.65mm x 8.90
Quote from: Dawn on March 20, 2014, 04:59:04 PM
A quick update.
I've got some of Aaron's pin pliers in stock. Red http://smoothdrag.com/Spool_Bearing_Pin_Removal_Pliers.html
Handles in gold http://smoothdrag.com/handles.html
Gear sets 113H & 114H http://smoothdrag.com/gear_sets.html
The Carbontex size list is updated. http://smoothdrag.com/Carbontex_washer_sizes_Retail3-2014.pdf
I've got 349H 5 drag stack KIT, Carbontex and Metal. Working on Daiwa 400H 5 drag stack, not sure how long on that. Working on Daiwa Tatula drags, about 3 weeks.
Dawn,
Regarding the Spool Bearing Pin Pliers, will it work with both low profile baitcasters (lexa 300, revo toro, curado 300) and "larger" inshore/"midshore" conventionals (sizes like Shimano Talica 8-16, Tekota 600LC, etc).
I'm looking for a general purpose bearing pin plier. I've glanced at the Hedgehog tool but seems a bit fragile and not capable of handling most reels, please advice.
Thanks
Richard (btw, great with Tsi321)