Print Page - Re: penn 112h clicker problem

Title: Re: penn 112h clicker problem
Post by: TheReelGuy850 on March 28, 2014, 04:10:23 AM

Been working on this reel a while. .kinda my boredom project. Its got a carbontex drag , ss gear sleeve and ss dog.Had to install a clicker tongue and button(peened it on).well seems like I have lots of play in there now.ok here's my problem. When I engage it in gear its great but if I put it in free spool with the clicker engaged a give the spool a spin it kicks off the clicker.

Title: Re: penn 112h clicker problem
Post by: Keta on March 28, 2014, 04:34:16 AM

Just a guess but it sounds like the clicker tongue was not all the way on the shaft when you peened it.

Title: Re: penn 112h clicker problem
Post by: harryk3616 on March 28, 2014, 07:23:09 AM

peen it more to tighten it up, but be careful not to slip and crack the side plate

Title: Re: penn 112h clicker problem
Post by: Shark Hunter on March 28, 2014, 05:27:03 PM

I use the one with the c-clip as a replacement. I replaced one on a 12/0 that worked out great. I was afraid of running into the same problem you have.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: TheReelGuy850 on March 28, 2014, 04:10:23 AM