Print Page - Bearing dimensions on Avet LX 2 speed

Title: Bearing dimensions on Avet LX 2 speed
Post by: Pescador on March 30, 2014, 08:25:40 PM

I am having a difficult time getting a good measurment on the thrust bearing in the sideplate of the Avet Lx. Width I show as 16mm, Thickness as 5mm, but the inside diameter is reading 6.31 . Is there another measurement like inches for that or what?

Title: Re: Bearing dimensions on Avet LX 2 speed
Post by: alantani on March 31, 2014, 05:02:33 PM

check to see if it's in inches. http://alantani.com/index.php?topic=1190.0

Title: Re: Bearing dimensions on Avet LX 2 speed
Post by: Keta on March 31, 2014, 05:25:28 PM

Quote from: alantani on March 31, 2014, 05:02:33 PM
check to see if it's in inches. http://alantani.com/index.php?topic=1190.0

Avet bearings are inch.

Title: Re: Bearing dimensions on Avet LX 2 speed
Post by: Robert Janssen on March 31, 2014, 10:04:05 PM

Quote from: Pescador on March 30, 2014, 08:25:40 PM
I am having a difficult time getting a good measurment on the thrust bearing in the sideplate of the Avet Lx. Width I show as 16mm 15.875, Thickness as 5mm 4.97, but the inside diameter is reading 6.31 6.35. Is there another measurement like inches for that or what?

15.87 = 5/8"
4.97 = 0.1960"
6.35 = 1/4"

Also known as R4 size. Make sense now?

.

Reel Repair by Alan Tani

Welcome! => Welcome! => Topic started by: Pescador on March 30, 2014, 08:25:40 PM