It said for drag washers on the jar... Sounds like there are better options.
What's the best way to clean the carbontex drag washers before re-greasing them?
Thanks
If you are just cleaning the old drag grease off and applying new drag grease, just rub them off with a rag then apply new grease with a toothbrush in a circular motion. If lever drag, wipe off excess. If star drag reel, just install. Excess grease will be pressed out.
Quote from: indoman on May 02, 2014, 01:30:21 AM
It said for drag washers on the jar... Sounds like there are better options.
Penn grease is good stuff and if it said it was for drag washers I wouldn't worry about it.
Say What?
There is no penn drag grease!
What you talkin' bout Willis! :P
Somewhere on here it is reported that Penn uses Penn grease for their CF drag disks, they say they haven't found anything better.
Ron
penn has a duragel that is a pure teflon product. it was tested against cal's grease and penn decided to stick with duragel even though cal's product was tested out as superior. so says cal sheets. :-\
What's the cost (per lb) difference?
Ok. Thanks.