Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: Billy V on May 13, 2014, 12:34:56 AM

Title: What is the difference between 6-114 and 6-115
Post by: Billy V on May 13, 2014, 12:34:56 AM
What is the difference between a #6-114 or #6-115 Carbon Fiber Drag Washer under the main gear in a 114H ?

The fiber washer that is being replaced is the size of the #6-115, but I see some people using the #6-114 to do this upgrade ?

What is the reason ?
Title: Re: What is the difference between 6-114 and 6-115
Post by: Bryan Young on May 13, 2014, 01:39:00 AM
The difference is the OD of the drag washer.  I use 6-114 because it will never bind with the anti-reverse dog.
Title: Re: What is the difference between 6-114 and 6-115
Post by: Billy V on May 13, 2014, 02:43:20 AM
I hadn't noticed that it was that close. It is an issue that happens from time to time, or an outside possibility of happening ?

I just figured the fiber washer was already that diameter so all was good....
Title: Re: What is the difference between 6-114 and 6-115
Post by: Alto Mare on May 13, 2014, 02:46:38 AM
I've noticed that a small washer that sits inside the ratchet is good, a washer that is oversized, same size as the one in the stack is better. What will get caught with the tip of the dogs is the size in between.
Text only | Text with Images