Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn 99/Jigmaster/SurfMaster/Squidder Tutorials and Questions => Topic started by: txangler81 on May 20, 2014, 03:58:35 AM

Title: surfmaster
Post by: txangler81 on May 20, 2014, 03:58:35 AM
What are the size differences in the different surfmaster reels. I know a 250 and a jigmaster 500 are basically the same size. but what about the rest.
Title: Re: surfmaster
Post by: Keta on May 20, 2014, 04:07:40 AM
The Surfmaster 100, 150 and 200 are smaller in diameter than the Surfmaster 250 and Jigmasters.  The 100 is the same width as a 501/506 Jigmaster, the 150 the same width as a 99 and the 200 Jigmaster 500/505 width.
Title: Re: surfmaster
Post by: Ron Jones on May 20, 2014, 05:14:28 AM
Just to add a bit, the small Surfmasters  are the same size as the Squidders and Beachmasters. The 100 Surfmaster, 146 Squidder and 180 Baymaster use the same rings, stand and cross bars.

Ron
Title: Re: surfmaster
Post by: txangler81 on May 21, 2014, 04:26:04 AM
ok so the 100 is the same size as the 146, is the 150 the same size as a 145, and is the 200 the same as a 140. also I have seen aluminum spools for the 100 are there any for the others.
Title: Re: surfmaster
Post by: Ron Jones on May 21, 2014, 04:39:16 AM
The 100 spool will fit the 180 and the Beachmaster and the Surfmaster of the same size use the same spool, your size description is correct. The squidder is a whole different kettle of fish with bearings and a different pinion and so it uses it's own spool. The Surfmaster and squidder use the same main gear though.
Ron
Title: Re: surfmaster
Post by: txangler81 on May 21, 2014, 04:53:44 AM
are there any aluminum spools available for the 150 200 250
Title: Re: surfmaster
Post by: Ron Jones on May 21, 2014, 05:16:47 AM
Yes,
I believe Scott's has the two smaller ones, the 250 uses a Jigmaster spool.
Ron
Title: Re: surfmaster
Post by: Keta on May 21, 2014, 05:17:19 AM
Yes, the Surfmaster 250 uses the same 29L-500 spool as the Jigmaster 500, you can use a Jigmaster 501 frame and a 29L-501 spool to make a Surfmaster 250N.  The Surfmaster 100 uses a 29L-100, the 150 uses a 29L-150 and the 200 uses a 29L-200

29L-100   https://www.mysticparts.com/PennParts/Parts/29L-100.aspx (https://www.mysticparts.com/PennParts/Parts/29L-100.aspx)
29L-150  https://www.mysticparts.com/PennParts/Parts/29L-150.aspx (https://www.mysticparts.com/PennParts/Parts/29L-150.aspx)
29L-200  https://www.mysticparts.com/PennParts/Parts/29L-200.aspx (https://www.mysticparts.com/PennParts/Parts/29L-200.aspx)
29L-500  https://www.mysticparts.com/PennParts/Parts/29L-500.aspx (https://www.mysticparts.com/PennParts/Parts/29L-500.aspx)


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Title: Re: surfmaster
Post by: txangler81 on May 21, 2014, 07:56:24 PM
Thank y'all for the advice.