Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: Drisse on May 26, 2014, 03:35:47 PM

Title: Shimano Calcutta TE 401 Parts ?
Post by: Drisse on May 26, 2014, 03:35:47 PM
Hi !

I'm looking for some parts for a Shimano Calcutta TE 401.

http://fish.shimano.com/media/fishing/SAC/techdocs/en/Round_Baitcasting/cte401ARB_v1_m56577569830570320.pdf

I need the drive shaft BNT2752 and I have in mind to change the bearing under the drive shaft BNT2948 to a bushing.
Anyone who knows the bearing sizes on this reel and if Shimano have a bushing that will fit ?

If so, any idea where I can get the parts and get them posted international to Sweden ?

Thanks in advance !
Title: Re: Shimano Calcutta TE 401 Parts ?
Post by: Dr. Jekyll - AKA MeL B on May 26, 2014, 05:26:25 PM
I have the Calcutta 400BSV and it has a bushing  # BNT0819. If your drive shaft bearing's dimension is OD 9MM ID 5MM thickness 3MM,you might be able to use this bushing. hope this helps...
Title: Re: Shimano Calcutta TE 401 Parts ?
Post by: Drisse on May 26, 2014, 11:54:32 PM
Thanks ML B ! I'll see if I can get the bearing size. Thanks for your advice :)
Title: Re: Shimano Calcutta TE 401 Parts ?
Post by: Dr. Jekyll - AKA MeL B on June 01, 2014, 05:06:45 PM
no problem! please let us know how it turns out so we can pass around if it resolves it. thanks!
Text only | Text with Images