Print Page - 80 VSW main gears

Title: 80 VSW main gears
Post by: Rwade27 on June 05, 2014, 11:23:23 PM

I have a question about the main gears in this International 80VSW. Does anyone know how to separate the hi and low speed gear? The schematic shows what looks like a snap retaining ring. I cannot see it in there. Thanks.

Title: Re: 80 VSW main gears
Post by: Tightlines667 on June 05, 2014, 11:41:06 PM

This should be what you need...

http://alantani.com/index.php?topic=7972.0

You will need:
-a sharp awl
-quadrant retaining screw and driver
-small needle nose pliers

*patience

Title: Re: 80 VSW main gears
Post by: Rwade27 on June 06, 2014, 12:02:25 AM

Thanks. Got it. I thought it had to just pry apart like that. Just did not want to break anything.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn International Tutorials and Questions => Topic started by: Rwade27 on June 05, 2014, 11:23:23 PM