Ok the dog spring on my number 9 will not hold tension on the dog it is a thin piece of copper colored metal are the ones from scotts good or are there any other options. also on my squidder one of the small skrews on the handle side inside plate that goes into the bars broke I got it out of the bar but now im down a skrew do I just need to order one from scotts or will the local hardware store have one thanks
scotts parts are a-1 .the screw has a fillister head and is stainless, order both you'll be good to go
the head of the skrew broke in half when I tried to remove it to replace the rings lol
pm me your address and i'll put a spring and screw in an envelope and mail them to you.
Thank you sir I greatly appreciate you doing that.
Harry,
You are a good Man! Its people like you that make this site so great! ;D
thanks daron, don't sell your self short, you are a great guy also.
Quote from: txangler81 on July 03, 2014, 05:02:27 AM
Thank you sir I greatly appreciate you doing that.
dustin i might have messed up, you said the plate on the handle side, was the screw a small flat head screw? also it was for a cross bar? it's longer than the reel stand screw let me know it will be in tomorrows mail
I haven't met a bad person yet on this site all of yall are great I have learned so much thank yall
it is a bar screw on the handle side it is a short flat head screw with a tapered head
it's on it's way
again thank you
Quote from: harryk3616 on July 03, 2014, 05:15:44 AM
thanks daron, don't sell your self short, you are a great guy also.
Harry
Daron is also does Expert Repairs on Senator Reels
Mike
Quote from: harryk3616 on July 03, 2014, 05:15:44 AM
thanks daron, don't sell your self short, you are a great guy also.
Quote from: Shark Hunter on July 03, 2014, 05:10:35 AM
Harry,
You are a good Man! Its people like you that make this site so great! ;D
Quote from: txangler81 on July 03, 2014, 05:21:48 AM
I haven't met a bad person yet on this site all of yall are great I have learned so much thank yall
I am trying to type a response but the tears in my eyes get in the way. :'( :'( :'( :D
Dominick
Always the Comedian! :D
there just jealous daron, enjoy the 4th. of july and the three day weekend
Quote from: txangler81 on July 03, 2014, 05:43:15 AM
again thank you
dustin screws and dog spring are on the way, mailed this morning, but with the holiday might take a day or two extra. harry
thank you sir
Bumping this back up.
Same problem with the spring, also looks like I need a new dog. Hole is hogged out. Anti reverse is intermittent
Is there a SS option?
Bryan had a few SS 9 and 209 dogs and I can cut more. I'm reluctant to using SS dogs on brass gear sleeves though, Alan has the right gearsleeve. No real reason but that's the way I work.
I have yet to see a dog hogged out like that. Granted, I don't fish 209's, but I do have one. I've not seen this in Senators. The tip of the dog wears out before this happens. Not doubting you Tech. That's just a new one for me.
I've seen it one or two times, I think it is caused by someone trying to force the reel backwards.
Quote from: Shark Hunter on March 19, 2015, 05:50:21 AM
I have yet to see a dog hogged out like that. Granted, I don't fish 209's, but I do have one. I've not seen this in Senators. The tip of the dog wears out before this happens. Not doubting you Tech. That's just a new one for me.
When I got this reel the pinion gear was split so something went drastically wrong.