Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: MuskyFishing on July 20, 2014, 08:04:20 AM

Title: disassembly Staltist STTL50HA
Post by: MuskyFishing on July 20, 2014, 08:04:20 AM
My very first reel,   and I'm afraid to open it. 
Will parts go flying like fireworks if I take off the covers?
Should I pack the internal parts with grease?
What are  the four holes for?
how much is too much grease?
What to use to  lubricate the levelwind gear/shaft?
How difficult is it to pack the bearings AND REPLACE ALL PARTS PROPERLY AND FACING THE CORRECT WAY?
Title: Re: disassembly Staltist STTL50HA
Post by: Bryan Young on July 20, 2014, 09:16:29 AM
You may want to give http://alantani.com/index.php?topic=227.0 a look-over. 
Title: Re: disassembly Staltist STTL50HA
Post by: MuskyFishing on July 20, 2014, 02:00:59 PM
What are  the four holes for, On the crank side?   ???
There are holes, not threaded for screws   STTLW50HA
Text only | Text with Images