Reel Repair by Alan Tani

General Maintenance Tips => Ordering Reel Parts => Topic started by: fisher480 on September 02, 2014, 07:15:06 AM

Title: Penn Spinfisher 8500SS
Post by: fisher480 on September 02, 2014, 07:15:06 AM
I know this will be a tough one but a friend of mine had a car accident and his beloved Spinfisher came away with a broken reel foot. Is there anyone out there with a spare body?
Title: Re: Penn Spinfisher 8500SS
Post by: foakes on September 02, 2014, 02:12:20 PM
You will likely find one on this site, or you might buy a parts reel on ebay.

My client experience with repairing quality spinners after vehicle accidents is this:

Seldom when the foot or stem is broken in a mishap like this, that is the only problem...

We visually focus on the broken foot or stem because they are clearly evident.

Generally, upon closer inspection and operating -- we will find a tweaked handle, bent handle grip, dented rotor, bent spool shaft, chipped spool, resistant bail operation, maybe even interior damage when an impact occurred.

Unless I am dead certain the only issue is a broken foot -- I generally find a parts reel, and swap out everything it needs.  The client still has their reel for sentimental purposes -- but all issues have been addressed.

Good luck on your search.

Best,

Fred

Title: Re: Penn Spinfisher 8500SS
Post by: MFB on September 03, 2014, 06:28:50 AM
I haven't used this supplier before, they list a few Penn parts.  http://www.anglerscentral.com.au/find-buy-spare-parts/penn-spare-parts-reel-schematics/spinning-reels/penn-8500ss.html

Rgds

Mark
Title: Re: Penn Spinfisher 8500SS
Post by: wallacewt on September 03, 2014, 07:49:09 AM
ANGLERS CENTRAL in  sth australia are very good and fair, but slow
they carry a very wide range of parts for the reels they service.
quickest way is to ring them
08-8244-8790
spareparts@anglerscentral.com.au
i have been dealing with them for a couple of years.
shimano aust; is a different story
hope this helps
Title: Re: Penn Spinfisher 8500SS
Post by: fisher480 on September 04, 2014, 09:39:59 PM
Thanks guys I will check it out.