Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: HOLEINTHEWATER on November 16, 2014, 06:05:44 PM

Title: DAIWA 50H
Post by: HOLEINTHEWATER on November 16, 2014, 06:05:44 PM
LOOKS LIKE CAT FISHING TIME IS OVER AND TIME TO REBUILD REELS.
TOM HAS THIS DAIWA WANTED ME TO GO THREW. LOOKS A LOT LIKE THE PENNS INSIDE. NEVER BEEN CLEANED. THINKING ABOUT CHANGING OUT THE DRAG WASHERS, WHILE I GOT IT A PART. IT WILL NEVER BE USED IN SALT WATER AGAIN. ANY OTHER SUGGESTIONS?
(http://i688.photobucket.com/albums/vv242/DAVEMCCALL1234/11-15-2014%20DAIWA%2050H/494167237.jpg) (http://s688.photobucket.com/user/DAVEMCCALL1234/media/11-15-2014%20DAIWA%2050H/494167237.jpg.html)

(http://i688.photobucket.com/albums/vv242/DAVEMCCALL1234/11-15-2014%20DAIWA%2050H/494075540.jpg) (http://s688.photobucket.com/user/DAVEMCCALL1234/media/11-15-2014%20DAIWA%2050H/494075540.jpg.html)
Title: Re: DAIWA 50H
Post by: RowdyW on November 16, 2014, 07:47:02 PM
Hi HitW, try a set of Penn 6-114  HT-100 drags. That & a good cleaning & lubing is all they need.     RUDY
Title: Re: DAIWA 50H
Post by: bluefish69 on November 17, 2014, 12:26:11 AM
Dawn has these Carbon X Drag Washers already cut & waiting for a fish to test them. I put them in my 3 - 50 H Reels

Mike
Text only | Text with Images