Alan,
Great tutorial, thank you!!!
I'm working on a relatively new 50vsw that clearly is gummed up inside. The handle feels like it's binding, very tight. I've started the disassembly and have two questions:
First – for the step to remove the shifter retaining plate (key #133) – is there a secret to getting that sucker out? I managed to pry it out but wonder if there was a better way. It's a fragile thin piece and wonder if I should replace it since it's a bit out of shape now?
Second, I've gotten to the step to remove the retaining ring (key #195) and am stuck. I did remove the retaining ring, but I cannot get the main gear assembly out of the right side plate. It seems stuck and I'm hesitant to force it. I've tapped it lightly, but it didn't budge. Any suggestions?
Thanks!
Ok, I was able to get the main gear assembly out (a few more taps and the shaft started to move) and believe I found the gummed up part. There is some corrosion in the tube and it needs to be cleaned out, perhaps lubed.