Just wondering if Im not putting enough grease on my teflon drag washers or any drag washers as a matter of fact. Do you slather them up like you would grease up the gears inside the reel or just a light coat. Im pretty new to this stuff so thanks for the help
thorough coat. for lever drag reels, wipe off the excess. for star drag reels, the excess will compress out.
Sorry but its still the 105c spinner Im still working on, But thanks for the info on the other reels I have not even started working on yet
same thing as a star drag reel. just slather on the drag grease!
I was only putting very little on them cause I didnt know. So Im guessing that that could be a big part of my problem. Thanks alot