Print Page - Belleville Washers on Makaira 10

Title: Belleville Washers on Makaira 10
Post by: Bill Benrath on December 21, 2014, 04:34:31 PM

Anyone know the orientation of the belleville washers on a Makaira 10? There are two sets of four washers; I knocked both stacks over chasing my cat <grin>. I presume they are ()().

Happy Holidays

Bill

Title: Re: Belleville Washers on Makaira 10
Post by: alantani on December 21, 2014, 06:57:23 PM

hard to tell from the schematic and i don't remember off hand. i'd try "(())" and see if the spacing is right. if not, go back to "()()" .

http://assetsstage.okumafishing.com/schematics/MK-10II.pdf

Title: Re: Belleville Washers on Makaira 10
Post by: Bill Benrath on December 21, 2014, 07:55:01 PM

Thanks Alan,
Everything worked; with my reel and account

Title: Re: Belleville Washers on Makaira 10
Post by: alantani on December 21, 2014, 08:27:06 PM

great!!!!

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Okuma Tutorials and Questions => Topic started by: Bill Benrath on December 21, 2014, 04:34:31 PM